OMRON Photoelectric Sensor - E3ZM series
Photoelectric Sensor Built-in Amplifier - E3ZM series
Download PDF
Model Numbers | Photoelectric Sensor Built-in Amplifier - E3ZM series
Sensors
| Sensing method | Appearance | Connection method | Sensing distance | Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Through- beam (Emitter + Receiver) |
 |
Pre-wired (2 m) | 15 m (Infrared light) |
E3ZM-T61 2M Emitter E3ZM-T61-L 2M Receiver E3ZM-T61-D 2M |
E3ZM-T81 2M Emitter E3ZM-T81-L 2M Receiver E3ZM-T81-D 2M |
| Connector (M8, 4 pins) |
E3ZM-T66 Emitter E3ZM-T66-L Receiver E3ZM-T66-D |
E3ZM-T86 Emitter E3ZM-T86-L Receiver E3ZM-T86-D |
|||
| Pre-wired (2 m) | 0.8 m (apertures built in) (Infrared light) |
E3ZM-T63 2M Emitter E3ZM-T63-L 2M Receiver E3ZM-T63-D 2M |
E3ZM-T83 2M Emitter E3ZM-T83-L 2M Receiver E3ZM-T83-D 2M |
||
| Connector (M8, 4 pins) |
E3ZM-T68 Emitter E3ZM-T68-L Receiver E3ZM-T68-D |
E3ZM-T88 Emitter E3ZM-T88-L Receiver E3ZM-T88-D |
|||
| Retro- reflective with MSR function |
 *1 |
Pre-wired (2 m) | 4 m (100 mm) *2 (Using E39-R1S) (Red light) |
E3ZM-R61 2M | E3ZM-R81 2M |
| Connector (M8, 4 pins) |
E3ZM-R66 | E3ZM-R86 | |||
| Diffuse- reflective |
 |
Pre-wired (2 m) | 1 m (Infrared light) |
E3ZM-D62 2M | E3ZM-D82 2M |
| Connector (M8, 4 pins) |
E3ZM-D67 | E3ZM-D87 | |||
| BGS reflective (fixed distance) |
 |
Pre-wired (2 m) | 10 to 100 mm (Red light) |
E3ZM-LS61H 2M | E3ZM-LS81H 2M |
| Connector (M8, 4 pins) |
E3ZM-LS66H | E3ZM-LS86H | |||
| Pre-wired (2 m) | 10 to 150 mm (Red light) |
E3ZM-LS62H 2M | E3ZM-LS82H 2M | ||
| Connector (M8, 4 pins) |
E3ZM-LS67H | E3ZM-LS87H | |||
| Pre-wired (2 m) | 10 to 200 mm (Red light) |
E3ZM-LS64H 2M | E3ZM-LS84H 2M | ||
| Connector (M8, 4 pins) |
E3ZM-LS69H | E3ZM-LS89H | |||
- The Reflector is sold separately. Select the Reflector model most suited to the application.
- Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Accessories (Order Separately)
Reflectors
(A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
| Name | E3ZM-R Sensing distance * | Model | Quantity | Remarks | |
|---|---|---|---|---|---|
| Rated value | Reference value | ||||
| Reflector | 3 m (100 mm) | - | E39-R1 | 1 | Reflectors are not provided with Retro-reflective models. The MSR function is enabled. |
| 4 m (100 mm) | - | E39-R1S | 1 | ||
| - | 5 m (100 mm) | E39-R2 | 1 | ||
| - | 2.5 m (100 mm) | E39-R9 | 1 | ||
| - | 3.5 m (100 mm) | E39-R10 | 1 | ||
| Fog Preventive Coating | - | 3 m (100 mm) | E39-R1K | 1 | |
| Small Reflector | - | 1.5 m (50 mm) | E39-R3 | 1 | |
| Tape Reflector | - | 700 mm (150 mm) | E39-RS1 | 1 | |
| - | 1.1 m (150 mm) | E39-RS2 | 1 | ||
| - | 1.4 m (150 mm) | E39-RS3 | 1 | ||
Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lightsproperly when you install the Sensor. * Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Mounting Brackets
A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
| Appearance | Model (Material) | Quantity | Remarks |
|---|---|---|---|
 |
E39-L153 (SUS304) *1 |
1 | Mounting Brackets |
 |
E39-L104 (SUS304) *1 |
1 | |
 |
E39-L43 (SUS304) *2 |
1 | Horizontal Mounting Bracket |
 |
E39-L142 (SUS304) *2 |
1 | Horizontal Protective Cover Bracket |
 |
E39-L44 (SUS304) |
1 | Rear Mounting Bracket |
 |
E39-L98 (SUS304) *2 |
1 | Metal Protective Cover Bracket |
 |
E39-L150 (SUS304) |
1 set | (Sensor adjuster) Easily mounted to the aluminum frame rails of conveyors and easily adjusted. For left to right adjustment |
 |
E39-L151 (SUS304) |
1 set | |
 |
E39-L144 (SUS304) *2 |
1 | Compact Protective Cover Bracket |
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
- Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
- Cannot be used for Standard Connector models.
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
| Size | Cable | Appearance | Cable type | Model | ||
|---|---|---|---|---|---|---|
| M8 (4 pins) *1 | Standard | Straight *2 |  |
2 m | 4-wire | XS3F-M421-402-A |
| 5 m | XS3F-M421-405-A | |||||
| L-shaped *2 *3 |  |
2 m | XS3F-M422-402-A | |||
| 5 m | XS3F-M422-405-A | |||||
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
- Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC 60529)
- The connector will not rotate after connecting.
- The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
Specifications | Photoelectric Sensor Built-in Amplifier - E3ZM series
Ratings and Specifications
| Sensing method | Through-beam | Retro-reflective with MSR function |
Diffuse-reflective Models |
||
| Model | NPN output | E3ZM-T61 E3ZM-T66 |
E3ZM-T63 E3ZM-T68 |
E3ZM-R61 E3ZM-R66 |
E3ZM-D62 E3ZM-D67 |
| PNP output | E3ZM-T81 E3ZM-T86 |
E3ZM-T83 E3ZM-T88 |
E3ZM-R81 E3ZM-R86 |
E3ZM-D82 E3ZM-D87 |
|
| Sensing distance | 15 m | 0.8 m | 4 m [100 mm] (Using E39-R1S) 3 m [100 mm] (Using E39-R1) |
1 m (White paper 300 × 300 mm) |
|
| Spot diameter (typical) | - | ||||
| Standard sensing object | Opaque: 12-mm dia. min. |
Opaque: 2-mm dia. min. |
Opaque: 75-mm dia. min. |
- | |
| Differential travel | - | 20% of sensing distance max. |
|||
| Black/white error | - | ||||
| Directional angle | Emitter, Receiver: 3° to 15° | Sensor: 3° to 10° Reflector: 30° |
- | ||
| Light source (wavelength) | Infrared LED (870 nm) | Red LED (660 nm) | Infrared LED (860 nm) | ||
| Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | ||||
| Current consumption | 40 mA max. (Emitter 20 mA max., Receiver 20 mA max.) |
25 mA max. | |||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON switch selectable |
||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection |
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
|||
| Response time | Operate or reset: 1 ms max. | ||||
| Sensitivity adjustment | One-turn adjuster | ||||
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | ||||
| Ambient temperature range | Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||||
| Insulation resistance | 20 MΩ min. at 500 VDC | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | ||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||||
| Degree of protection * | IEC: IP67, DIN 40050-9: IP69K | ||||
| Connection method | Pre-wired cable (standard length: 2 m) M8 4-pin Connector |
||||
| Indicator | Operation indicator (yellow), Stability indicator (green) (Emitter has only power supply indicator (green).) |
||||
| Weight (packed state) |
Pre-wired models (with 2-m cable) |
Approx. 150 g | Approx. 90 g | ||
| Connector models |
Approx. 60 g | Approx. 40 g | |||
| Materials | Case | SUS316L | |||
| Lens | PMMA (polymethylmethacrylate) | ||||
| Display | PEI (Polyetherimide) | ||||
| Sensitivity adjustment and mode selector switch |
PEEK (polyetheretherketone) | ||||
| Seals | Fluoro rubber | ||||
| Accessories | Instruction sheet (Note: Reflectors and Mounting Brackets are sold separately.) | ||||
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
| Sensing method | BGS Reflective Models | |||
| Model | NPN output | E3ZM-LS61H E3ZM-LS66H |
E3ZM-LS62H E3ZM-LS67H |
E3ZM-LS64H E3ZM-LS69H |
| PNP output | E3ZM-LS81H E3ZM-LS86H |
E3ZM-LS82H E3ZM-LS87H |
E3ZM-LS84H E3ZM-LS89H |
|
| Sensing distance | 10 to 100 mm (White paper 100 × 100 mm) |
10 to 150 mm (White paper 100 × 100 mm) |
10 to 200 mm (White paper 100 × 100 mm) |
|
| Spot diameter (typical) | 4-mm dia. at sensing distance of 100 mm |
12-mm dia. at sensing distance of 150 mm |
18-mm dia. at sensing distance of 200 mm |
|
| Standard sensing object | --- | |||
| Differential travel | 3% of sensing distance max. | 15% of sensing distance max. | 20% of sensing distance max. | |
| Black/white error | 5% of sensing distance max. | 10% of sensing distance max. | 20% of sensing distance max. | |
| Directional angle | --- | |||
| Light source (wavelength) |
Red LED (650 nm) | Red LED (660 nm) | ||
| Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | |||
| Current consumption | 25 mA max. | |||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON cable connection selectable |
|||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, Mutual interference protection |
|||
| Response time | Operate or reset: 1 ms max. | |||
| Sensitivity adjustment | - | |||
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | |||
| Ambient temperature range |
Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) | |||
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | |||
| Insulation resistance | 20 MΩ min. at 500 VDC | |||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | |||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | |||
| Degree of protection * | IEC: IP67, DIN 40050-9: IP69K | |||
| Connection method | Pre-wired cable (standard length: 2 m) M8 4-pin Connector |
|||
| Indicator | Operation indicator (yellow), Stability indicator (green) | |||
| Weight (packed state) |
Pre-wired models (with 2-m cable) |
Approx. 90 g | ||
| Connector models |
Approx. 40 g | |||
| Materials | Case | SUS316L | ||
| Lens | PMMA (polymethylmethacrylate) | |||
| Display | PEI (Polyetherimide) | |||
| Seals | Fluoro rubber | |||
| Accessories | Instruction sheet (Note: Mounting Brackets are sold separately.) | |||
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
Dimensions | Photoelectric Sensor Built-in Amplifier - E3ZM series
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Through-beam Models* Pre-wired Models E3ZM-T61 E3ZM-T81 E3ZM-T63 E3ZM-T83
Through-beam Models* Standard Connector E3ZM-T66 E3ZM-T86 E3ZM-T68 E3ZM-T88 
* Models numbers for Through-beam Sensors (E3ZM-T[][]) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M), the model number of the Receiver by adding "-D" (example: E3ZM-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. 
Retro-reflective Models Pre-wired Models E3ZM-R61 E3ZM-R81
Diffuse-reflective Models Standard Connector E3ZM-D62 E3ZM-D82
BGS Reflective Models Pre-wired Models E3ZM-LS61H E3ZM-LS62H E3ZM-LS64H E3ZM-LS81H E3ZM-LS82H E3ZM-LS84H 
Retro-reflective Models Standard Connector E3ZM-R66 E3ZM-R86
Diffuse-reflective Models Standard Connector E3ZM-D67 E3ZM-D87
BGS Reflective Models Standard Connector E3ZM-LS66H E3ZM-LS67H E3ZM-LS69H E3ZM-LS86H E3ZM-LS87H E3ZM-LS89H
Features | Photoelectric Sensor Built-in Amplifier - E3ZM series
- Strong resistance against detergents, disinfectants, and jet liquid flow.
- Product lineup includes BGS Reflective Models and Through-beamModels with built-in slits.
- Certified by Ecolab Europe.
Properties | Photoelectric Sensor Built-in Amplifier - E3ZM series
| Photoelectric Sensor Built-in Amplifier | E3ZM |
|---|---|
| Sensing method | Through-beam, Retro-reflective, Diffuse reflective, BGS Reflective |
| Sensing distance | 10 - 100 mm |
| 10 - 150 mm | |
| 10 - 200 mm | |
| 0.8 m | |
| 1 m | |
| 4 m | |
| 15 m | |
| Power supply voltage | 10 - 30 VDC |
| Current consumption | 40 mA max, 25 mA max |
| Response time | 1 ms max |
| Degree of protection | IP67, IP69K |
| Materials case | SUS316L |
Photoelectric Sensor Built-in Amplifier - E3ZM series
ดาวน์โหลดไฟล์ PDF เลือกรุ่นสินค้า | Photoelectric Sensor Built-in Amplifier - E3ZM series
เซนเซอร์
| วิธีการตรวจจับ | ลักษณะ | วิธีการเชื่อมต่อ | ระยะการตรวจจับ | รุ่นสินค้า | |
|---|---|---|---|---|---|
| เอาต์พุต NPN | เอาต์พุต PNP | ||||
| Through- beam (ตัวส่ง +ตัวรับ) |
|
มีสายในตัว (2 ม.) |
15 ม. (แสงอินฟราเรด) |
E3ZM-T61 2M Emitter E3ZM-T61-L 2M Receiver E3ZM-T61-D 2M |
E3ZM-T81 2M Emitter E3ZM-T81-L 2M Receiver E3ZM-T81-D 2M |
| คอนเนคเตอร์ (M8, 4 pins) |
E3ZM-T66 Emitter E3ZM-T66-L Receiver E3ZM-T66-D |
E3ZM-T86 Emitter E3ZM-T86-L Receiver E3ZM-T86-D |
|||
| มีสายในตัว (2 ม.) |
0.8 ม. (มีรูรับแสงในตัว) (แสงอินฟราเรด) |
E3ZM-T63 2M Emitter E3ZM-T63-L 2M Receiver E3ZM-T63-D 2M |
E3ZM-T83 2M Emitter E3ZM-T83-L 2M Receiver E3ZM-T83-D 2M |
||
| คอนเนคเตอร์ (M8, 4 พิน) |
E3ZM-T68 Emitter E3ZM-T68-L Receiver E3ZM-T68-D |
E3ZM-T88 Emitter E3ZM-T88-L Receiver E3ZM-T88-D |
|||
| Retro- reflective with MSR function |
*1 |
มีสายในตัว (2 ม.) |
4 ม. (100 มม.)*2 (ใช้E39-R1S) (แสงสีแดง) |
E3ZM-R61 2M | E3ZM-R81 2M |
| คอนเนคเตอร์ (M8, 4 พิน) |
E3ZM-R66 | E3ZM-R86 | |||
| Diffuse- reflective |
|
มีสายในตัว (2 ม.) |
1 ม. (แสงอินฟราเรด) |
E3ZM-D62 2M | E3ZM-D82 2M |
| คอนเนคเตอร์ (M8, 4 พิน) |
E3ZM-D67 | E3ZM-D87 | |||
| BGS reflective (fixed distance) |
|
มีสายในตัว (2 ม.) |
10 ถึง 100 มม. (แสงสีแดง) |
E3ZM-LS61H 2M | E3ZM-LS81H 2M |
| คอนเนคเตอร์ (M8, 4 พิน) |
E3ZM-LS66H | E3ZM-LS86H | |||
| มีสายในตัว (2 ม.) |
10 to 150 mm (Red light) |
E3ZM-LS62H 2M | E3ZM-LS82H 2M | ||
| คอนเนคเตอร์ (M8, 4 พิน) |
E3ZM-LS67H | E3ZM-LS87H | |||
| มีสายในตัว (2 ม.) |
10 ถึง 200 มม. (แสงสีแดง) | E3ZM-LS64H 2M | E3ZM-LS84H 2M | ||
| คอนเนคเตอร์ (M8, 4 พิน)) |
E3ZM-LS69H | E3ZM-LS89H | |||
- * แผ่นสะท้อนแสงแยกจำหน่ายต่างหาก เลือกรุ่นแผ่นสะท้อนแสงที่เหมาะกับการใช้งานมากที่สุด
- * ค่าในวงเล็บระบุระยะห่างขั้นต่ำที่ต้องการระหว่างเซนเซอร์และตัวสะท้อนแสง
อุปกรณ์เสริม (สั่งซื้อแยกต่างหาก)
แผ่นสะท้อนแสง
(ต้องใช้ตแผ่นสะท้อนแสงสำหรับเซนเซอร์แบบ Retroreflective) เซนเซอร์ไม่มีแผ่นสะท้อนแสง อย่าลืมสั่งซื้อแผ่นสะท้อนแยกแสงต่างหาก
| รายการ | E3ZM-R ระยะตรวจจับ* | รุ่น | ปริมาณ | หมายเหตุ | |
|---|---|---|---|---|---|
| ระยะทั่วไป | ระยะทั่วไป | ||||
| แผ่นสะท้อนแสง | 3 ม. (100 มม.) | - | E39-R1 | 1 | รุ่น Retro-reflective ไม่มีแผ่นสะท้อนแสง •เปิดใช้งานฟังก์ชัน MSR |
| 4 ม. (100 มม.) | - | E39-R1S | 1 | ||
| - | 5 ม. (100 มม.) | E39-R2 | 1 | ||
| - | 2.5 ม. (100 มม.) | E39-R9 | 1 | ||
| - | 3.5 ม.(100 มม.) | E39-R10 | 1 | ||
| เคลือบสารป้องกันหมอก | - | 3 ม. (100 มม.) | E39-R1K | 1 | |
| แผ่นสะท้อนแสงขนาดเล็ก | - | 1.5 ม. (50 มม.) | E39-R3 | 1 | |
| เทปสะท้อนแสง | - | 700 มม. (150 มม.) | E39-RS1 | 1 | |
| - | 1.1 ม. (150 มม.) | E39-RS2 | 1 | ||
| - | 1.4 ม. (150 มม.) | E39-RS3 | 1 | ||
หมายเหตุ:
- หากคุณใช้แผ่นสะท้อนแสงในระยะอื่น ๆ นอกเหนือจากระยะที่กำหนดตรวจสอบให้แน่ใจว่าไฟแสดงความเสถียรสว่างขึ้นอย่างถูกต้องเมื่อคุณติดตั้งเซนเซอร์
- ค่าในวงเล็บแสดงระยะห่างขั้นต่ำที่ต้องการระหว่างเซนเซอร์และแผ่นสะท้อนแสง
ขายึด
ขายึดไม่ได้ติดกับเซนเซอร์ สั่งซื้อขายึดแยกต่างหากหากจำเป็น
| ลักษณะ | รุ่น (วัสดุ) | ปริมาณ | หมายเหตุ |
|---|---|---|---|
|
E39-L153 (SUS304) *1 |
1 | ขายึด |
|
E39-L104 (SUS304) *1 |
1 | |
|
E39-L43 (SUS304) *2 |
1 | ขายึดแนวนอน |
|
E39-L142 (SUS304) *2 |
1 | ขายึดแบบฝาครอบป้องกันแนวนอน |
|
E39-L44 (SUS304) |
1 | ขายึดด้านหลัง |
|
E39-L98 (SUS304) *2 |
1 | ตัวยึดแบบฝาครอบป้องกันโลหะ |
|
E39-L150 (SUS304) |
1 set | (ตัวปรับเซนเซอร์) ติดตั้งเข้ากับรางโครงอลูมิเนียมของสายพานลำเลียงได้อย่างง่ายดาย และปรับเปลี่ยนได้ง่าย สำหรับการปรับซ้ายไปขวา |
|
E39-L151 (SUS304) |
1 set | |
|
E39-L144 (SUS304) *2 |
1 | ตัวยึดแบบฝาครอบป้องกันขนาดกะทัดรัด |
หมายเหตุ : เมื่อใช้รุ่น Through-beam ให้สั่งตัวยึดหนึ่งตัวสำหรับตัวรับและอีกตัวสำหรับตัวส่ง
- ไม่สามารถใช้กับคอนเนคเตอร์มาตรฐานรุ่นที่มีพื้นผิวยึดที่ด้านล่าง ในกรณีนั้นให้ใช้รุ่นคอนเนคเตอร์แบบมีสาย
- ไม่สามารถใช้กับรุ่นคอนเนคเตอร์มาตราฐาน
คอนเนคเตอร์ I/O เซ็นเซอร์ (ซ็อกเก็ตที่ปลายสายด้านหนึ่ง)
(สำหรับรุ่นคอนเนคเตอร์: ไม่มีคอนเนคเตอร์มากับเซนเซอร์ อย่าลืมสั่งซื้อคอนเนคเตอร์แยกต่างหาก)
| ขนาด | ประเภทสาย | ลักษณะ | สายเคเบิล | รุ่น | ||
|---|---|---|---|---|---|---|
| M8 (4 พิน) *1 | มาตรฐาน | ตรง *2 | |
2 ม. | 4 สาย | XS3F-M421-402-A |
| 5 ม. | XS3F-M421-405-A | |||||
| รูปตัว L*2 *3 | |
2 ม. | XS3F-M422-402-A | |||
| 5 ม. | XS3F-M422-405-A | |||||
หมายเหตุ : เมื่อใช้รุ่นThrough-beam ให้สั่งขั้วต่อหนึ่งตัวสำหรับตัวรับและอีกตัวหนึ่งสำหรับตัวส่ง
- ข้อมูลจำเพาะของสายเคเบิล: วัสดุเคลือบด้านนอก: PVC, วัสดุน๊อต: สแตนเลส, ระดับการป้องกัน: IP67 (IEC 60529)
- คอนเนคเตอร์จะไม่หมุนหลังจากเชื่อมต่อแล้ว
- สายเคเบิลคงที่ ที่มุม180°จากพื้นผิวตัวส่ง / ตัวรับเซ็นเซอร์
ข้อมูลทางเทคนิค | Photoelectric Sensor Built-in Amplifier - E3ZM series
Ratings and Specifications
| Sensing method | Through-beam | Retro-reflective with MSR function |
Diffuse-reflective Models |
||
| Model | NPN output | E3ZM-T61 E3ZM-T66 |
E3ZM-T63 E3ZM-T68 |
E3ZM-R61 E3ZM-R66 |
E3ZM-D62 E3ZM-D67 |
| PNP output | E3ZM-T81 E3ZM-T86 |
E3ZM-T83 E3ZM-T88 |
E3ZM-R81 E3ZM-R86 |
E3ZM-D82 E3ZM-D87 |
|
| Sensing distance | 15 m | 0.8 m | 4 m [100 mm] (Using E39-R1S) 3 m [100 mm] (Using E39-R1) |
1 m (White paper 300 × 300 mm) |
|
| Spot diameter (typical) | - | ||||
| Standard sensing object | Opaque: 12-mm dia. min. |
Opaque: 2-mm dia. min. |
Opaque: 75-mm dia. min. |
- | |
| Differential travel | - | 20% of sensing distance max. |
|||
| Black/white error | - | ||||
| Directional angle | Emitter, Receiver: 3° to 15° | Sensor: 3° to 10° Reflector: 30° |
- | ||
| Light source (wavelength) | Infrared LED (870 nm) | Red LED (660 nm) | Infrared LED (860 nm) | ||
| Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | ||||
| Current consumption | 40 mA max. (Emitter 20 mA max., Receiver 20 mA max.) |
25 mA max. | |||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON switch selectable |
||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection |
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection |
|||
| Response time | Operate or reset: 1 ms max. | ||||
| Sensitivity adjustment | One-turn adjuster | ||||
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | ||||
| Ambient temperature range | Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||||
| Insulation resistance | 20 MΩ min. at 500 VDC | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | ||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||||
| Degree of protection * | IEC: IP67, DIN 40050-9: IP69K | ||||
| Connection method | Pre-wired cable (standard length: 2 m) M8 4-pin Connector |
||||
| Indicator | Operation indicator (yellow), Stability indicator (green) (Emitter has only power supply indicator (green).) |
||||
| Weight (packed state) |
Pre-wired models (with 2-m cable) |
Approx. 150 g | Approx. 90 g | ||
| Connector models |
Approx. 60 g | Approx. 40 g | |||
| Materials | Case | SUS316L | |||
| Lens | PMMA (polymethylmethacrylate) | ||||
| Display | PEI (Polyetherimide) | ||||
| Sensitivity adjustment and mode selector switch |
PEEK (polyetheretherketone) | ||||
| Seals | Fluoro rubber | ||||
| Accessories | Instruction sheet (Note: Reflectors and Mounting Brackets are sold separately.) | ||||
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
| Sensing method | BGS Reflective Models | |||
| Model | NPN output | E3ZM-LS61H E3ZM-LS66H |
E3ZM-LS62H E3ZM-LS67H |
E3ZM-LS64H E3ZM-LS69H |
| PNP output | E3ZM-LS81H E3ZM-LS86H |
E3ZM-LS82H E3ZM-LS87H |
E3ZM-LS84H E3ZM-LS89H |
|
| Sensing distance | 10 to 100 mm (White paper 100 × 100 mm) |
10 to 150 mm (White paper 100 × 100 mm) |
10 to 200 mm (White paper 100 × 100 mm) |
|
| Spot diameter (typical) | 4-mm dia. at sensing distance of 100 mm |
12-mm dia. at sensing distance of 150 mm |
18-mm dia. at sensing distance of 200 mm |
|
| Standard sensing object | --- | |||
| Differential travel | 3% of sensing distance max. | 15% of sensing distance max. | 20% of sensing distance max. | |
| Black/white error | 5% of sensing distance max. | 10% of sensing distance max. | 20% of sensing distance max. | |
| Directional angle | --- | |||
| Light source (wavelength) |
Red LED (650 nm) | Red LED (660 nm) | ||
| Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | |||
| Current consumption | 25 mA max. | |||
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model) Light-ON/Dark-ON cable connection selectable |
|||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, Mutual interference protection |
|||
| Response time | Operate or reset: 1 ms max. | |||
| Sensitivity adjustment | - | |||
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | |||
| Ambient temperature range |
Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) | |||
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | |||
| Insulation resistance | 20 MΩ min. at 500 VDC | |||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | |||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | |||
| Degree of protection * | IEC: IP67, DIN 40050-9: IP69K | |||
| Connection method | Pre-wired cable (standard length: 2 m) M8 4-pin Connector |
|||
| Indicator | Operation indicator (yellow), Stability indicator (green) | |||
| Weight (packed state) |
Pre-wired models (with 2-m cable) |
Approx. 90 g | ||
| Connector models |
Approx. 40 g | |||
| Materials | Case | SUS316L | ||
| Lens | PMMA (polymethylmethacrylate) | |||
| Display | PEI (Polyetherimide) | |||
| Seals | Fluoro rubber | |||
| Accessories | Instruction sheet (Note: Mounting Brackets are sold separately.) | |||
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
ขนาด | Photoelectric Sensor Built-in Amplifier - E3ZM series
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Through-beam Models* Pre-wired Models E3ZM-T61 E3ZM-T81 E3ZM-T63 E3ZM-T83 Through-beam Models* Standard Connector E3ZM-T66 E3ZM-T86 E3ZM-T68 E3ZM-T88
* Models numbers for Through-beam Sensors (E3ZM-T[][]) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3ZM-T61-L 2M), the model number of the Receiver by adding "-D" (example: E3ZM-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. Retro-reflective Models Pre-wired Models E3ZM-R61 E3ZM-R81
Diffuse-reflective Models Standard Connector E3ZM-D62 E3ZM-D82
BGS Reflective Models Pre-wired Models E3ZM-LS61H E3ZM-LS62H E3ZM-LS64H E3ZM-LS81H E3ZM-LS82H E3ZM-LS84H Retro-reflective Models Standard Connector E3ZM-R66 E3ZM-R86
Diffuse-reflective Models Standard Connector E3ZM-D67 E3ZM-D87
BGS Reflective Models Standard Connector E3ZM-LS66H E3ZM-LS67H E3ZM-LS69H E3ZM-LS86H E3ZM-LS87H E3ZM-LS89H
คุณสมบัติ | Photoelectric Sensor Built-in Amplifier - E3ZM series
- ทนทานต่อสารทำความสะอาดสารฆ่าเชื้อและการไหลของเหลวจากเจ็ท
- กลุ่มผลิตภัณฑ์ประกอบด้วยรุ่น BGS Reflective และรุ่น Through-beam ที่มีแผ่นยึดในตัว
- ได้รับการรับรองจาก Ecolab Europe
ข้อมูลจำเพาะ | Photoelectric Sensor Built-in Amplifier - E3ZM series
| Photoelectric Sensor Built-in Amplifier | E3ZM |
|---|---|
| วิธีการตรวจจับ | Through-beam, Retro-reflective, Diffuse reflective, BGS Reflective |
| ระยะตรวจจับ | 10 - 100 มม. |
| 10 - 150 มม. | |
| 10 - 200 มม. | |
| 0.8 ม. | |
| 1 ม. | |
| 4 ม. | |
| 15 ม. | |
| แรงดันไฟฟ้า | 10 - 30 VDC |
| การใช้กระแสไฟฟ้า | สูงสุด 40 มิลลิแอมป์, สูงสุด 25 มิลลิแอมป์ |
| เวลาตอบสนอง | สูงสุด 1 มิลลิวินาที |
| ระดับการป้องกัน | IP67, IP69K |
| วัสดุตัวโครง | SUS316L |
Technology Instrument 
T.U Pack 
Your Lift