DIRECTIONAL SEAT VALVE รุ่น W-.SE6...X

3/2 and 4/2 directional seat valves with solenoid actuation

Direct operated directional seat valve with solenoid actuation for intended use in potentially explosive atmospheres
Porting pattern according to DIN 24340-A6
Subplates available in FE/ZN version (see dimensions)
Blocked port tight in a leak-free form
Safe switching also with longer standstill periods under pressure
Wet-pin DC solenoids in hydraulic fluid
Electrical connection with:
Individual connection with cable gland
Device plug depending on valve type
With manual override

01		02	03	04	05	06		07	08	09	10	11	12		13	14
M	-		SE	6		6X	/	420	B		N			/		V

Direct voltage 12 V
01	Water			W
02	3 main ports			3
02	4 main ports			4
03	Seat valve			SE
04	Size 6			6
05	Main ports	3	4
	Symbols
		●	–	U
		●	–	C
		–	●	D
		–	●	Y
	● = available
06	Component series 60 … 69 (60 … 69: unchanged installation and connection dimensions)			6X
07	Operating pressure 420 bar			420 bar
08	High-power solenoid (switching in hydraulic fluid)			B
09	Nominal power supply 190 mA			G12–19
10	With manual override (standard)			N
11	“Intrinsically safe” explosion protection for device group II (all except for mining)			XH
11	“Intrinsically safe” explosion protection for device group I (mining) For details, please refer to the explosion protection information			XM
Electrical connection
12	Solenoid with connector directed towards the valve housing			K20ZL
12	For details, please refer to Electrical connection
13	Without check valve insert, without throttle insert			no code
	With check valve insert			P
	Throttle Ø 1.2 mm			B12
	Throttle Ø 1.5 mm			B15
	Throttle Ø 1.8 mm			B18
	Throttle Ø 2.0 mm			B20
	Throttle Ø 2.2 mm			B22
14	FKM seals (other seals upon request)			V
14	Observe compatibility of seals with hydraulic fluid used.