DIRECTIONAL SEAT VALVE รุ่น M-.SED6...XN

3/2 and 4/2 directional seat valves with solenoid actuation

Direct operated directional seat valve with solenoid actuation for intended use in potentially explosive atmospheres
Porting pattern according to DIN 24340-A6
Subplates available in FE/ZN version (see dimensions)
Blocked port tight in a leak-free form
Safe switching also with longer standstill periods under pressure
Wet-pin DC solenoids
Solenoid coil is rotatable by 90°
Electrical connection as individual connection with connector according to EN 175301-803, design A
With manual override, optional

(valve without coil) 1)

01		02	03	04	05	06		07	08	09	10	11	12		13	14
M	-		SED	6		1X	/	350	C	G24		XN	K4	/

Electrical connection
01	Mineral oil			M
02	3 main ports			3
02	4 main ports			4
03	Seat valve, electrically operated			SED
04	Size			6
05	Main ports	3	4
	Symbols
		●	–	UK
		●	–	CK
		–	●	D
		–	●	Y
	● = available
06	Component series 10 … 19 (10 … 19: unchanged installation and connection dimensions)			1X
07	Operating pressure up to 350 bar			350 bar
08	Solenoid, wet-pin			C
09	Direct voltage 24 V			G24
10	With manual override			N9
10	Without manual override			no code
11	“Non-sparking” explosion protection, for details please refer to the explosion protection			XN
12	Solenoid without mating connector, for details please refer to Electrical connection			K4
13	Without check valve insert, without throttle insert			no code
	With check valve insert			P
	Throttle Ø 1.2 mm			B12
	Throttle Ø 1.5 mm			B15
	Throttle Ø 1.8 mm			B18
	Throttle Ø 2.0 mm			B20
	Throttle Ø 2.2 mm			B22
Seal material
14	NBR seals			no code
	FKM seals			V
	Observe compatibility of seals with hydraulic fluid used.

Included in the scope of delivery: