Manifolds รุ่น IH04M.L

ฐานยึดวาล์ว (Rexroth Press modules, type L)

Control systems do not comply with the safety rules of the industrial professional unions
On a control block, all valves are attached or installed
Piping is only necessary to the actuators, to the pump and to the tank
Clear control system set-up
Attached and installed valves are arranged in an easily accessible manner
Control systems have been tried and tested by default

01	02	03	04	05	06	07		08	09	10	11		12		13	14
IH04	M		L			2X	/					/

Size
01	Press module	IH04
02	Modular design	M
03	Size 20	20
	Size 25	25
	Size 32	32
	Size 40	40
	Size 50	50
	Size 63	63
	Size 80	80
	Size 100	100
04	Circuit type	L
05	Version
06	Flow symbol of the control valve
07	Component series 20 to 29 (20 to 29: unchanged installation and connection dimensions) - Size 6	2X
Solenoid
08	Wet-pin standard solenoid	A
	High-power solenoid	B
	Wet-pin standard solenoid with detachable coil	C
Solenoid voltage
09	Direct voltage 24 V	G24
	Alternating voltage 220 V, 50 Hz	W220-50
	Alternating voltage 110 V, 50 Hz (standard solenoids “A”)	W110-50
Manual override
10	Without manual override	no code
10	With concealed manual override	N9
Electrical connection
11	Cubic connector according to DIN 43650	Z4
	Large cubic connector	Z5
	Large cubic connector with lamp	Z5L
	Without cubic connector	K4
Pump protection
12	pilot operated	DB
	pilot-operated, magnetic unloading, normally open	DBW
	pilot-operated, electrically controllable, maximum protection	DBE
Logic element
13	Valve poppet without damping nose	E
	Valve poppet with damping nose	D
	Standard version	E
14	Further details in the plain text	*