Rexroth Hydraulic Cylinder - Mill Type Cylinder รุ่น CD Series กระบอกไฮดรอลิก แบบกระบอกกลม ทำงานทนทานกว่า สินค้าอุปกรณ์ไฮดรอลิกจาก Rexroth สินค้ามาตรฐานโลก ระดับสากล จัดจำหน่ายโดย นิวแอนด์ไฮด์ จำกัด

• 

  รุ่น CDH1

  1. Series H1
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 22 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CDH2

  1. Series H2
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 25 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CDH2...XC

  1. Series H2
  2. Component series 3X
  3. Nominal pressure 250 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 25 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CDH3

  1. Series H3
  2. Component series 3X
  3. Nominal pressure 350 bar
  4. Piston Ø 40 … 320 mm
  5. Piston rod Ø 28 … 220 mm
  6. Stroke length up to 6000 mm
• 

  รุ่น CDL2

  1. Series L2
  2. Component series 1X
  3. Nominal pressure 160 … 250 bar
  4. Piston Ø 25 … 200 mm
  5. Piston rod Ø 14 … 125 mm
  6. Stroke length up to 3000 mm
• 

  รุ่น CDM1

  1. Series M1
  2. Component series 2X
  3. Nominal pressure 160 bar
  4. Piston Ø 25 … 200 mm
  5. Piston rod Ø 14 … 140 mm
  6. Stroke length up to 3000 mm

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSM1

• Series H1
  (รุ่น H1)
• Component series 3X
  (ใช้ร่วมกับรุ่น 3X)
• Nominal pressure 250 bar
  (แรงดันปกติ)
• Piston Ø 40 … 320 mm
  (ขนาดลูกสูบ 40 - 320 mm)
• Piston rod Ø 22 … 220 mm
  (ก้านลูกสูบ 22 - 220 mm)

Features

• 6 types of mounting
  (การติดตั้งมี 6 แบบ)
• Self-adjusting and adjustable end position cushioning
  (ปรับกันกระแทกได้ตัวเองหรือจะตั้งค่าเอง)

SPECIFICATION (รายละเอียด)

Type code

01	Single rod cylinder		CD
02	Series		H1
Types of mounting
03	Swivel eye at cylinder base		MP3 1)
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 2)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 22 … 220 mm		...
06	Stroke length in mm3)		...
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D4; 9)
	Flange connection according to ISO 6164 tab. 2		H4)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C3 1)
	For directional and high-response valves	Subplate NG6	P4; 5)
		Subplate NG10	T4; 6)
		Subplate NG16	U4; 7)
		Subplate NG25	V4; 8)
	For SL and SV valves	Subplate NG6	A4; 5; 15)
		Subplate NG10	E4; 6; 15)
		Subplate NG20	L4; 7; 15)
		Subplate NG30	N4; 8; 15)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	iew to piston rod30)		1
			2 34)
			3
			4 34)
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 12)
	Nickel-plated and hard chromium-plated		N 19)
Piston rod end
13	Thread for swivel head CGAS		A
	Thread for swivel head CGA, CGAK, plain clevis CSA		G 13)
	With mounted swivel head CGAS		S
	With mounted swivel head CGA		L 13)
	With mounted swivel head CGAK		M 13)
	With mounted swivel head CSA		N 1)
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D 1)
	Both sides, adjustable		E
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G
		Servo quality/reduced friction	T
		Chevron seal kits	A
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S
		Standard seal system FKM	V
		Chevron seal kits	B
Option
16	Additional options, fill fields for additional options		Z
	Without additional options, do not fill fields for additional options		W

• 1) Only piston Ø 40 … 200 mm
• 2) Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• 4) Not possible with MF4
• 5) Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 6) Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 7) Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 8) Only piston Ø 160 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 9) Only piston Ø 80 … 320 mm
• 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
• 12) Only piston rod Ø 22 … 140 mm
• 13) Not with piston Ø 320 mm
• 14) Not possible with piston rod end "N"
• 15) Subplates for SL and SV valves (isolator valves)
• 19) Only piston rod Ø 28 … 160 mm
  Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 28) With seal design "L" standard
• 30) All graphical representations in the data sheet show position 1
• 31) With MS2, only position 11 is possible
• 34) With MF4 and line connection B, M or C not possible
• 35) Not possible with MP3
• 37) Min. stroke length = 20 mm
• 38) Marks order-relevant information which cannot be represented in the ordering code. This must be specified for each order.

Order example:
CDH1MP5/100/56/300A3X/B11CADMW
CDH1MP5/100/56/300A3X/B11CADMZ EWABW
With order-relevant information:
CDH1MP5/100/56/300A3X/B11CADMW-P
CDH1MP5/100/56/300A3X/B11CADMZ EWABW-P

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSM1

• Series H2
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 25 … 220 mm
• Stroke length up to 6000 mm

Features

• Standards: DIN 24333, ISO 6022
• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

01	Single rod cylinder		CD
02	Series		H2
Types of mounting
03	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 2)
	Foot mounting		MS2 18)
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 25 … 220 mm		...
06	Stroke length in mm3)		...
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M33)
	Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI)		F4; 21)
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D4; 9)
	Flange connection according to ISO 6164 tab. 1		K1; 4)
	Flange connection according to ISO 6164 tab. 2		H 4)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 31)
	For directional and high-response valves	Subplate NG6	P4; 5)
		Subplate NG10	T4; 6)
		Subplate NG16	U4; 7)
		Subplate NG25	V4; 32)
	For SL and SV valves	Subplate NG6	A4; 5; 15)
		Subplate NG10	E4; 6; 15)
		Subplate NG20	L4; 7; 15)
		Subplate NG30	N4; 32; 15)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 23)
	Nickel-plated and hard chromium-plated		N 19)
Piston rod end
13	Thread for swivel head CGKD		H
	With mounted swivel head CGKD		F
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D 1)
	Both sides, adjustable		E
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G
		Servo quality/reduced friction	T
		Chevron seal kits	A
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S
		Standard seal system FKM	V
		Chevron seal kits	B
Option
16	Additional options, fill fields for additional options		Z
	Without additional options, do not fill fields for additional options		W

• 1) Only piston Ø 40 … 200 mm
• 2) Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• 4) Not possible with MF4
• 5) Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 6) Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 7) Piston Ø 125… 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 9) Only piston Ø 80 … 320 mm
• 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
• 15) Subplates for SL and SV valves (isolator valves)
  Note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 18) Not standardized
• 19) Only piston rod Ø 28 … 160 mm
• 21) Only piston Ø 63 … 200 mm
• 23) Only piston rod Ø 25 … 140 mm
• 28) With seal design "L" standard
• 30) All graphical representations in the data sheet show position 1
• 31) With MS2, only position 11 is possible
• 32) Piston Ø 180 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 33) Version does not comply with ISO 6022
• 37) Min. stroke length = 20 mm
• 38) Marks order-relevant information which cannot be represented in the ordering code. This must be specified for each order.

Order examples:
Without additional options:
CDH2MT4/63/45/350A3X/B11CHDMW, XV = 300 mm
With additional options:
CDH2MF3/80/56/500A3X/B11CHDMZ EWAWW
With order-relevant information:
CDH2MT4/63/45/350A3X/B11CHDMW-P, XV = 300 mm
CDH2MF3/80/56/500A3X/B11CHDMZ EWAWW-P

Hydraulic cylinders for potentially explosive areas

รายละเอียด Hydraulic cylinders รุ่น CDH2...XC

• Series H2
• Component series 3X
• Nominal pressure 250 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 25 … 220 mm
• Stroke length up to 6000 mm

Features

• Standards: DIN 24333, ISO 6022
• 6 types of mounting

Type code

01	Single rod cylinder		CD
02	Series		H2
Types of mounting
03	Swivel eye at cylinder base		MP3
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT42 )
	Foot mounting		MS2 18)
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 25 … 220 mm		...
06	Stroke length in mm3)		...
Protection class for ATEX version
07	Design safety		XC
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M 33)
	Flange connection according to ISO 6162-1 tab. 2 type 1 (≙ SAE 3000 PSI)		F4; 21)
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D4; 9)
	Flange connection according to ISO 6164 tab. 1		K1; 4)
	Flange connection according to ISO 6164 tab. 2		H 4)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2
			3
			4
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 23)
	Nickel-plated and hard chromium-plated		N 24)
Piston rod end
13	Thread for swivel head CGKD		H
	With mounted swivel head CGKD		F
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D 1)
	Both sides, adjustable		E
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Servo quality/reduced friction	T
		Chevron seal kits	A
	For phosphoric acid esters HFR	Servo quality/reduced friction	S
		Chevron seal kits	B
Option
16	Additional options, fill fields for additional options		Z
	Without additional options, do not fill fields for additional options		W

• 1) Only piston Ø 40 … 200 mm
• 2) Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• 4) Not possible with MF4
• 9) Only piston Ø 80 … 320 mm
• 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
• 18) Not standardized
• 21) Only piston Ø 63 … 200 mm
• 23) Only piston rod Ø 25 … 140 mm
• 24) Only piston rod Ø 28 … 160 mm
• 30) All graphical representations in the data sheet show position 1
• 33) Version does not comply with ISO 6022

Order examples: Without additional options:
CDH2MT4/63/45/350XC3X/B11CHDMWW, XV = 300 mm
With additional options:
CDH2MF3/80/56/500XC3X/B11CHDMZ WWAWW

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CDH3

• Series H3
• Component series 3X
• Nominal pressure 350 bar
• Piston Ø 40 … 320 mm
• Piston rod Ø 28 … 220 mm
• Stroke length up to 6000 mm

Features

• 6 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

01	Single rod cylinder		CD
02	Series		H3
Types of mounting
03	Swivel eye at cylinder base		MP3 1)
	Self-aligning clevis at cylinder base		MP5
	Round flange at the cylinder head		MF3
	Round flange at the cylinder base		MF4
	Trunnion		MT4 2)
	Foot mounting		MS2
04	Piston Ø (ØAL) 40 … 320 mm		...
05	Piston rod Ø (ØMM) 28 … 220 mm		...
06	Stroke length in mm3)		...
Design principle
07	Head and base flanged		A
08	Component series 30 … 39 (30 … 39: unchanged installation and connection dimensions)		3X
Line connection / version
09	According to ISO 1179-1 (pipe thread ISO 228-1)		B
	According to ISO 9974-1 (metric thread ISO 261)		M
	Flange connection according to ISO 6162-2 tab. 2 type 1 (≙ SAE 6000 PSI)		D4; 25)
	Flange connection according to ISO 6164 tab. 2		H 4)
	according to ISO 1179-1 (pipe thread ISO 228-1) with flat pipe flange		C 31)
	For directional and high-response valves	Subplate NG6	P4; 5; 27)
		Subplate NG10	T4; 6; 27)
		Subplate NG16	U4; 7; 27)
		Subplate NG25	V4; 8; 27)
	For SL and SV valves	Subplate NG6	A4; 5; 15; 27)
		Subplate NG10	E4; 6; 15; 27)
		Subplate NG20	L4; 7; 15; 27)
		Subplate NG30	N4; 8; 15; 27)
Line connection/position at cylinder head
10	View to piston rod30)		1
			2
			3
			4
Line connection/position at cylinder base
11	View to piston rod30)		1
			2 34)
			3
			4 34)
Piston rod design
12	Hard chromium-plated		C
	Hardened and hard chromium-plated		H 24)
	Nickel-plated and hard chromium-plated		N 19)
Piston rod end
13	Thread for swivel head CGAS		A
	Thread for swivel head CGA, CGAK, plain clevis CSA		G 26)
	With mounted swivel head CGAS		S
	With mounted swivel head CGA		L 26)
	With mounted swivel head CGAK		M 26)
	With mounted plain clevis CSA		N 1)
End position cushioning
14	Without end position cushioning		U
	Both sides, self-adjusting		D 1)
	Both sides, adjustable		E
Seal design
15	For mineral oil HL, HLP and oil-in-water emulsion HFA	Standard seal system	M
		Standard seal system with guide rings	L
		Reduced friction heavy industry	R
	For mineral oil HL, HLP, oil-in-water emulsion HFA and water glycol HFC	Standard seal system HFC	G 27)
		Servo quality/reduced friction	T
		Chevron seal kits	A
	For HDFR phosphate ester and HFDU polyol ester	Servo quality/reduced friction	S
		Standard seal system FKM	V 27)
		Chevron seal kits	B
Option
16	Additional options, fill fields for additional options		Z
	Without additional options, do not fill fields for additional options		W

• 1) Only piston Ø 40 … 200 mm
• 2) Trunnion position freely selectable. When ordering, always specify the "XV" dimensions in the plain text in mm
• 3) For max. available stroke length see Technical data and for admissible stroke length (according to the kinking calculation) see Project planning information.
• 4) Not possible with MF4
• 5) Piston Ø 40 … 80 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 6) Piston Ø 63 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 7) Piston Ø 125 … 200 mm, only position 11, subplates only possible in combination with line connection “B” at the head
• 10) Seal designs A, B not possible; piston Ø 220 … 320 mm standard
• 13) Not with piston Ø 320 mm
• 14) Not possible with piston rod end "N"
• 15) Subplates for SL and SV valves (isolator valves)
Please note: Seal designs T, G, L, R, S and V are not designed for the static holding function!
• 19) Only piston rod Ø 28 … 160 mm
• 24) Only piston rod Ø 28 … 140 mm
• 25) Only piston Ø 63 … 320 mm
• 26) Only piston Ø 40 … 250 mm
• 27) Maximum operating pressure 315 bar
• 28) With seal design "L" standard
• 30) All graphical representations in the data sheet show position 1
• 31) With MS2, only position 11 is possible
• 34) With MF4 and line connection B, M or C not possible
• 35) Not possible with MP3
• 37) Min. stroke length = 20 mm
• 38) Marks order-relevant information which cannot be represented in the ordering code. This must be specified for each order.

Order examples:
Without additional options:
CDH3MP5/100/56/300A3X/B11CADMW
With additional options:
CDH3MP5/100/56/300A3X/B11CADMZ EWABW
With order-relevant information:
CDH3MP5/100/56/300A3X/B11CADMW-P
CDH3MP5/100/56/300A3X/B11CADMZ EWABW-P

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CSM1

• Series L2
• Component series 1X
• Nominal pressure 160 … 250 bar
• Piston Ø 25 … 200 mm
• Piston rod Ø 14 … 125 mm
• Stroke length up to 3000 mm

Features

• 4 types of mounting
• Short length of assembly

Type code

Type
01	Single rod cylinder	CD
02	Series L2	L2
Types of mounting
03	Self-aligning clevis at cylinder base	MP5
	Round flange at the cylinder head	MF3 1)
	Trunnion	MT41;2)
	Without mounting	M00 3)
04	Piston Ø (ØAL) from 25 … 200 mm; possible version see Technical data	...
05	Piston rod Ø (ØMM) with nominal pressure 160 bar: 14, 18, 22, 28, 36, 45, 56 and 70 mm possible; see Technical data	...
	Piston rod Ø (ØMM) with nominal pressure 250 bar: 25, 32, 40, 50, 63, 80, 100 and 125 mm possible; see Technical data
06	Stroke length in mm; observe admissible stroke lengths; see Project planning information	...
Design principle
07	Head and base screwed in	C 3)
	Head screwed in, base welded	D 4)
08	Component series 10 … 19 (10 … 19: unchanged installation and connection dimensions)	1X
Line connection / version
09	Pipe thread according to ISO 228/1	B
Line connection/position at cylinder head
10	View to piston rod	1
Line connection/position at cylinder base
11	View to piston rod	1
Piston rod design
12	Hard chromium-plated	C
Piston rod end
13	Thread	H 4)
	Piston rod end “H” with mounted swivel head CGKD	K 4)
	With swivel head, cannot be disassembled	F 4;5)
	Internal thread	E 3)
	Piston rod end “E” with mounted swivel head CGKL	L 3)
End position cushioning
14	Without end position cushioning	U
Seal design
15	Standard seal system (suitable for mineral oils HL, HLP)	M
	Standard seal system FKM (for phosphate ester HFDR)	V
Option 1
16	Without option	W
Option 2
17	Without option	W
	With piston rod extension “LY” in mm	Y6)
18	Further details in the plain text	*

• 1) Only piston Ø (ØAL) 25 … 125 mm
• 2) Trunnion position freely selectable. When ordering, always specify the dimension "XV/XU" in the plain text in mm (see order example)
• 3) Only piston Ø (ØAL) 25 … 32 mm
• 4) Only piston Ø (ØAL) 40 … 200 mm
• 5) Only MP5; MT4
• 6) When ordering, always specify the piston rod extension dimension "LY" in the plain text in mm (see order example)

Order example:
CDL2MT4/100/56/200D1X/B11CHUMWY, LY = 20 mm, XV = 245 mm
CDL2MF3/80/45/100D1X/B11CHUMWW

Hydraulic cylinder, Mill type cylinder

รายละเอียด Hydraulic cylinder, mill type รุ่น CDM1

• Series M1
• Component series 2X
• Nominal pressure 160 bar
• Piston Ø 25 … 200 mm
• Piston rod Ø 14 … 140 mm
• Stroke length up to 3000 mm

Features

• Installation dimensions according to ISO 6020/1 and VW 39 D 920
• 9 types of mounting
• Self-adjusting and adjustable end position cushioning

Type code

• 1) Only available upon request
• 2) Piston Ø 25 … 125 mm
• 3)When ordering, always specify the "XV" dimensions in the plain text in mm (see order example)
• 4) Piston Ø 63 … 200 mm
• 5) Not for MF2; MF4
• 6) Piston Ø 50 … 200 mm
• 7) Piston Ø 40… 200 mm
• 8) Piston Ø 40 … 80 mm, only position 11
• 9) Piston Ø 63 … 200 mm, only position 11
• 10) Piston Ø 125 … 200 mm, only position 11
• 11) Piston rod Ø 14 … 110 mm
• 12) Piston rod Ø 22 … 140 mm
• 13) Subplates only possible with pipe thread (ISO 1179-1)
• 14) Subplates for SL and SV valves (isolator valves)
  Please note: Seal designs T and S are not designed for the static holding function!
• 15) Per piston Ø only possible with large piston rod Ø
• 16) All graphical representations in the data sheet show position 1
• 17) When ordering, always specify the piston rod extension dimension "LY" in the plain text in mm (see order example)

Order example:
CDM1MT4/50/28/550A2X/B11CGDMWW, XV = 175 mm
CDM1MF3/200/140/950A2X/B11CHKAWW
Note:
Replacement cylinder for series 1X
In case of exchange with series 2X, you also have to exchange the bearing blocks (trunnions)!