OMRON Photoelectric Sensor - ZX-L-N series

Model Numbers | Photoelectric Displacement Sensor - ZX-L-N series

Sensors

Sensor Heads (Reflective)

Optical system	Beam shape	Sensing distance	Resolution *1	Model
Diffuse reflective	Spot beam	40 ± 10 mm	2 μm	ZX-LD40
		100 ± 40 mm	16 μm	ZX-LDa100
		300 ± 200 mm	300 μm	ZX-LD300
	Line beam	40 ± 10 mm	2 μm	ZX-LD40L
		100 ± 40 mm	16 μm	ZX-LD100L
		300 ± 200 mm	300 μm	ZX-LD300L
Regular reflective	Spot beam	30 ± 2 mm	0.25 μm	ZX-LD30V
	Line beam			ZX-LD30VL

• For an average count of 4,096.

Sensor Heads (Through-beam)

Optical system	Measuring width	Sensing distance	Resolution*1	Model *2
Through-beam	1-mm dia.	0 to 500 mm	4 μm	ZX-LT001
	1 to 2.5-mm dia.	500 to 2000 mm	---
	5 mm	0 to 500 mm	4 μm	ZX-LT005
	10 mm			ZX-LT010
	30 mm		12 μm	ZX-LT030 0.5M

1. For an average count of 64.
2. The cable length for all models is 0.5 m.

Amplifier Units

Appearance	Power supply	Output type	Model
	DC	NPN	ZX-LDA11-N 2M
		PNP	ZX-LDA41-N 2M

Note: Compatible connection with the Sensor Head.

Accessories (Order Separately)

Calculating Unit

Appearance	Model
	ZX-CAL2

Side-view Attachments

Appearance	Applicable Sensor Head	Model	Quantity
	ZX-LT1001/ LT005	ZX-XF12	1
	ZX-LT010	ZX-XF22

Logging Tool for Personal Computers

Appearance	Name	Model
	Communications Interface Unit (RS-232C)	ZX-SF11
	Smart Monitor *3 (Logging Software + Function Setting Software)	ZX-SW11EV3 *1

Setup Tool for Personal Computer

Appearance	Name	Model
	Communications Interface Unit (RS-232C) + Smart Monitor Basic *2 *3 (Function Setting Software)	ZX-SFW11EV3 *1

1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the Smart Monitor with the ZX-LDA11-N/41-N. Earlier versions cannot be used.
2. The Smart Monitor Basic does not have a logging function. Other than the logging function, the Smart Monitor Basic supports the same functions as the Smart Monitor.
3. It is prohibited to copy, to reproduce, and to distribute a part of or whole part of this document without the permission of OMRON Corporation.

Cables with Connectors on Both Ends (for Extension) *1

Cable length	Model	Quantity
1 m	ZX-XC1A 1M	1
4 m	ZX-XC4A 4M
8 m	ZX-XC8A 8M
9 m *2	ZX-XC9A 9M

1. Robot cable models are also available. The model numbers are ZX-XC[]R.
2. For use only with Reflective Sensors.

Bank Unit

Appearance	Model
	ZX-SB11

Specifications | Photoelectric Displacement Sensor - ZX-L-N series

Sensor Heads (Reflective)

Model	ZX-LD40	ZX-LD100	ZX-LD300	ZX-LD30V	ZX-LD40L	ZX-LD100L	ZX-LD300L	ZX-LD30VL
Optical system	Diffuse reflective			Regular reflective	Diffuse reflective			Regular reflective
Light source (wave length)	Visible-light semiconductor laser with a wavelength of 650 nm and an output of 1 mW max.
	EN class 2, FDA class II
Measurement point	40 mm	100 mm	300 mm	30 mm	40 mm	100 mm	300 mm	30 mm
Measurement range	± 10 mm	± 40 mm	± 200 mm	± 2 mm	± 10 mm	± 40 mm	± 200 mm	± 2 mm
Beam shape	Spot				Line
Beam size*1	50-μm dia.	100-μm dia.	300-μm dia.	75-μm dia.	75 μm x 2 mm	150 μm x 2 mm	450 μm x 2 mm	100 μm x 1.8 mm
Resolution*2	2 μm	16 μm	300 μm	0.25 μm	2 μm	16 μm	300 μm	0.25 μm
Linearity*3	± 0.2% FS (entire range)	± 0.2% FS (80 to 120 mm)	± 2% FS (200 to 400 mm)	± 0.2% FS (entire range)	± 0.2% FS (32 to 48 mm)	± 0.2% FS (80 to 120 mm)	± 2% FS (200 to 400 mm)	± 0.2% FS (entire range)
Temperature characteristic*4	± 0.03% FS/°C (Except for ZX-LD300 and ZX-LD300L, which are ± 0.1% FS/°C.)
Ambient temperature	Incandescent lamp: 3,000 l× max. (on light receiving side)
Ambient illumination	Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destru ction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection	IEC60529, IP50			IEC60529, IP40	IEC60529, IP50			IEC60529, IP40
Connection method	Connector relay (standard cable length: 500 mm)
Weight (packed state)	Approx. 150 g			Approx. 250 g	Approx. 150 g			Approx. 250 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass			Case and cover: Aluminum, Lens: Glass	Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass			Case and cover: Aluminum, Lens: Glass
Accessories	Instruction sheet, Laser warning label (English)

1. Beam size: The beam size is defined by 1/e² (13.5%) of the strength of the beam at the beam center (measured value). Incorrect detection may occur if there is light leakage outside the defined spot and the material around the sensing object is more reflective than the sensing object.
2. Resolution: The resolution is the deviation (±3σ) in the linear output when connected to the ZX-LDA Amplifier Unit. (The resolution is measured with the standard reference object (white ceramic), at the measurement point with the ZX-LDA set for an average count of 4,096 per period.)
   The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields.
3. Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured.
4. Temperature characteristic: The temperature characteristic is measured at the measurement point with the Sensor and reference object (OMRON's standard reference object) secured with an aluminum jig. Note: Highly reflective objects can result in incorrect detection by causing out-of-range measurements.

Sensor Heads (Through-beam)

Model		ZX-LT001		ZX-LT005	ZX-LT010	ZX-LT030
Optical system		Through-beam
Light source (wave length)		Visible-light semiconductor laser with a wavelength of 650 nm
		EN class 1, FDA class II
Light source (wave length)	Maximum output	0.2 mW max.		0.35 mW max.		0.2 mW max.
Measurement width		1-mm dia.	1- to 2.5-mm dia.	5 mm	10 mm	30 mm
Measurement distance		0 to 500 mm	500 to 2,000 mm	0 to 500 mm
Minimum sensing object		8-μm dia. (opaque)	8- to 50-μm dia. (opaque)	0.05-mm dia. (opaque)	0.1-mm dia. (opaque)	0.3-mm dia. (opaque)
Resolution*1		4 μm*2	---	4 μm*3		12 μm*4
Temperature characteristic		±0.2% FS/°C				±0.3% FS/°C
Ambient illumination		Incandescent lamp: 10,000 l× max. (on light-receiving side)
Ambient temperature		Operating: 0 to 50°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity		Operating: 35% to 85% (with no condensation)
Degree of protection		IEC60529, IP40
Connection method		Connector relay (standard cable length: 500 mm)
Weight (packed state)		Approx. 220 g				Approx. 450 g
Cable length		Extendable up to 10 m with special extension cable.
Materials	Case	Polyether imide				Zinc die-cast
	Cover	Polycarbonate
	Front filter	Glass
Tightening torque		0.3 Nm max.
Accessories		Instruction sheet, Sensor Head-Amplifier Connection Cable
		Optical axis adjustment seal				Mounting Bracket

1. This value is obtained by converting the deviation (±3σ) in the linear output that results when the sensor head is connected to the amplifier unit, into the measurement width.
2. For an average count of 64. The value is 5 μm for an average count of 32. This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
3. For an average count of 64. The value is 5 μm for an average count of 32.
4. For an average count of 64. The value is 15 μm for an average count of 32.

Amplifier Units

Model	ZX-LDA11-N	ZX-LDA41-N
Measurement period *1	150 μs
Possible average count settings	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096
Temperature characteristic	When connected to a Reflective Sensor Head: 0.01% FS/°C, When connected to a Through-beam Sensor Head: 0.1% FS/°C
Linear output *2	Current output: 4 to 20 mA/FS, Max. load resistance: 300 Ω Voltage output: ±4 V (± 5 V, 1 to 5 V *3), Output impedance: 100 Ω
Judgement outputs (3 outputs: HIGH/PASS/LOW) *1	NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max.	PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max.
Laser OFF input, zero reset input, timing input, reset input	ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.)	ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.)
Functions	Measurement value display, present value/set value/light level/resolution display, scaling, display reverse, display OFF mode, ECO mode, number of display digit changes, sample hold, peak hold, bottom hold, peak-to- peak hold, self-peak hold, self-bottom hold, average hold, delay hold, intensity mode, zero reset, initial reset, ON-delay timer, OFF-delay timer, one-shot timer, deviation, previous value comparison, sensitivity adjustment, keep/clamp switch, direct threshold value setting, position teaching, 2-point teaching, automatic teaching, hysteresis width setting, timing inputs, reset input, monitor focus, linear output compensation, (A-B) calculations14, (A+B) calculations*4, mutual interference*4, laser deterioration detection, zero reset memory, zero reset display, key lock
Indications	Operation indicators: High (orange), pass (green), low (yellow), 7-segment main display (red), 7-segment subdisplay (yellow), laser ON (green), zero reset (green), enable (green)
Power supply voltage	12 to 24 VDC ± 10%, Ripple (p-p): 10% max.
Current consumption	140 mA max. with power supply voltage of 24 VDC (with Sensor connected)
Ambient temperature	Operating and storage: 0 to 50°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Connection method	Prewired (standard cable length: 2 m)
Weight (packed state)	Approx. 350 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories	Instruction sheet

1. The response time for the first linear output or judgment output is calculated as follows (with fixed sensitivity): Measurement period × (Average count setting + 1). The response time for the second and later outputs is the measurement period specified in the table.
2. The output can be switched between a current output and voltage output using a switch on the bottom of the Amplifier Unit.
3. Setting is possible via the monitor focus function.
4. A Calculating Unit (ZX-CAL2) is required.

Calculating Unit

Model	ZX-CAL2
Applicable Amplifier Units	ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41
Current consumption	12 mA max. (supplied from the Smart Sensor Amplifier Unit)
Ambient temperature	Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Connection method	Connector
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Insulation resistance	100 MΩ (at 500 VDC)
Vibration resistance (destructive)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destructive)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Materials	Display: Acrylic, Case: ABS resin
Weight (packed state)	Approx. 50 g

ZX-series Communications Interface Unit

Item		ZX-SF11
Current consumption		60 mA max. (supplied by the Amplifier Unit)
Applicable Amplifier Units		ZX Series
Applicable Amplifier Unit versions		ZX-LDA[]1-N Ver. 2.100 or higher ZX-EDA[]1 Ver. 1.100 or higher ZX-TDA[]1 Ver. 1.000 or higher
Max. No. of Amplifier Units		5 (max. 2 with calculating unit)
Commu- nications functions	Communications port	RS-232C port (9-pin D-Sub Connector)
	Communications protocol	CompoWay/F*
	Baud rate	38,400 bps
	Data configuration	Data bits: 8, Parity: none, Start bits: 1, Stop bits: 1, Flow control: none
Indicators		Power supply: green, Sensor communications: green, Sensor communications error: red, External terminal communications: green, External terminal communications error: red
Protective circuits		Reverse polarity protection
Ambient temperature		Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity		Operating and storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Materials		Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories		Instruction sheet, 2 clamps

* Contact your OMRON representative for CompoWay/F communications specifications.

Dimensions | Photoelectric Displacement Sensor - ZX-L-N series

Sensor Heads (Diffuse Reflective)

ZX-LD40 ZX-LD100 ZX-LD300 ZX-LD40L ZX-LD100L ZX-LD300L

Sensor Heads (Regular Reflective)

ZX-LD30V ZX-LD30VL

Sensor Heads (Through-beam)

ZX-LT001 ZX-LT005

ZX-LT010

ZX-LT030

Sensor Head - Amplifier Unit Connection Cable

Amplifier Units

ZX-LDA11-N ZX-LDA41-N

Accessories (Order Separately)

Calculating Unit

ZX-CAL2

Side-view Attachments

ZX-XF12

ZX-XF22

ZX-series Communications Interface Unit
ZX-SF11

Cables with Connectors on Both Ends (for Extension)
ZX-XC1A (1 m)
ZX-XC4A (4 m)
ZX-XC8A (8 m)
ZX-XC9A (9 m)

Features | Photoelectric Displacement Sensor - ZX-L-N series

Smart Sensors (Laser Displacement & Measurement Sensors)

---

Properties | Photoelectric Displacement Sensor - ZX-L-N series

Photoelectric Displacement Sensor	ZX-L-N
Optical system	Diffuse reflective, Regular reflective
Measurement point	30 mm, 40 mm, 100 mm, 300 mm
Beam shape	Spot, Line
Resolution	0.25 μm, 2 μm, 16 μm, 300 μm
Degree of protection	IP40, IP50
Materials Case	PBT, Aluminum

เลือกรุ่นสินค้า | Photoelectric Displacement Sensor - ZX-L-N series

เซนเซอร์

หัวเซ็นเซอร์ (Reflective)

ระบบออปติกคอล	รูปร่างลำแสง	ระยะตรวจจับ	ความละเอียด*1	รุ่นสินค้า
Diffuse reflective	ลำแสงแบบจุด	40 ± 10 มม.	2 ไมโครเมตร	ZX-LD40
		100 ± 40 มม.	16 ไมโครเมตร	ZX-LD100
		300 ± 200 มม.	300 ไมโครเมตร	ZX-LD300
	ลำแสงแบบเส้น	40 ± 10 มม.	2 ไมโครเมตร	ZX-LD40L
		100 ± 40 มม.	16 ไมโครเมตร	ZX-LD100L
		300 ± 200 มม.	300 ไมโครเมตร	ZX-LD300L
Regular reflective	ลำแสงแบบจุด	30 ± 2 มม.	0.25 ไมโครเมตร	ZX-LD30V
	ลำแสงแบบเส้น			ZX-LD30VL

• สำหรับการนับเฉลี่ยอยู่ที่4,096

หัวเซ็นเซอร์ (Through-beam)

ระบบออปติกคอล	ความกว้างของการวัด	ระยะตรวจจับ	ความละเอียด*1	รุ่นสินค้า*2
Through-beam	1 มม.	0 to 500 มม.	4 ไมโครเมตร	ZX-LT001
	1 ถึง 2 มม.	500 to 2000 มม.	---
	5 มม.	0 to 500 มม.	4 ไมโครเมตร	ZX-LT005
	10 มม.			ZX-LT010
	30 มม.		12 ไมโครเมตร	ZX-LT030 0.5M

1. สำหรับการนับเฉลี่ยอยู่ที่ 64
2. สายทุกรุ่นยาว 0.5 ม.

หน่วย แอมพลิฟายเออร์

ลักษณะ	แหล่งจ่ายไฟ	ประเภทเอาต์พุต	รุ่นสินค้า
	DC	NPN	ZX-LDA11-N 2M
		PNP	ZX-LDA41-N 2M

หมายเหตุ : การเชื่อมต่อที่เข้ากันได้กับหัวเซนเซอร์

อุปกรณ์เสริม (แยกจำหน่าย)

หน่วย คำนวณ

ลักษณะ	รุ่น
	ZX-CAL2

อุปกรณ์ติดตั้งด้านข้าง

ลักษณะ	หัวเซนเซอร์ที่ใช้งานได้	รุ่นสินค้า	ปริมาณ
	ZX-LT1001/ LT005	ZX-XF12	1
	ZX-LT010	ZX-XF22

เครื่องมือบันทึกสำหรับคอมพิวเตอร์ส่วนบุคคล

ลักษณะ	รายการ	รุ่นสินค้า
	หน่วยเชื่อมต่อการสื่อสาร (RS-232C)	ZX-SF11
	Smart Monitor *3 (Logging Software + Function Setting Software)	ZX-SW11EV3 *1

เครื่องมือติดตั้งสำหรับคอมพิวเตอร์ส่วนบุคคล

ลักษณะ	รายการ	รุ่นสินค้า
	หน่วยเชื่อมต่อการสื่อสาร (RS-232C) + Smart Monitor Basic * 2 * 3 (Function Setting Software)	ZX-SFW11EV3 *1

1. ต้องใช้ ZX-SFW11EV3 หรือ ZX-SW11EV3 เพื่อใช้ Smart Monitor กับZX-LDA11-N/41-N ไม่สามารถใช้เวอร์ชั่นก่อน
2. Smart Monitor Basic ไม่มีฟังก์ชันการบันทึก นอกเหนือจากฟังกชันการบันทึกแล้ว Smart Monitor Basic ยังรองรับฟังก์ชันเดียวกับ Smart Monitor
3. ห้ามคัดลอกทำซ้ำและแจกจ่ายบางส่วนหรือทั้งหมดของเอกสารนี้โดยไม่ได้รับอนุญาตจาก OMRON โคโปเรชั่น

สายเคเบิลที่มีขั้วต่อที่ปลายทั้งสองข้าง (สำหรับเพิ่มเติม) *1

ความยาวสาย	รุ่น	ปริมาณ
1 m	ZX-XC1A 1M	1
4 m	ZX-XC4A 4M
8 m	ZX-XC8A 8M
9 m *2	ZX-XC9A 9M

1. นอกจากนี้ยังมีรุ่นสายหุ่นยนต์ หมายเลขรุ่นคือ ZX-XC[]R
2. สำหรับใช้กับเซนเซอร์ Reflective Sensors เท่านั้น

Bank Unit

Appearance	Model
	ZX-SB11

ข้อมูลทางเทคนิค | Photoelectric Displacement Sensor - ZX-L-N series

Sensor Heads (Reflective)

Model	ZX-LD40	ZX-LD100	ZX-LD300	ZX-LD30V	ZX-LD40L	ZX-LD100L	ZX-LD300L	ZX-LD30VL
Optical system	Diffuse reflective			Regular reflective	Diffuse reflective			Regular reflective
Light source (wave length)	Visible-light semiconductor laser with a wavelength of 650 nm and an output of 1 mW max.
	EN class 2, FDA class II
Measurement point	40 mm	100 mm	300 mm	30 mm	40 mm	100 mm	300 mm	30 mm
Measurement range	± 10 mm	± 40 mm	± 200 mm	± 2 mm	± 10 mm	± 40 mm	± 200 mm	± 2 mm
Beam shape	Spot				Line
Beam size*1	50-μm dia.	100-μm dia.	300-μm dia.	75-μm dia.	75 μm x 2 mm	150 μm x 2 mm	450 μm x 2 mm	100 μm x 1.8 mm
Resolution*2	2 μm	16 μm	300 μm	0.25 μm	2 μm	16 μm	300 μm	0.25 μm
Linearity*3	± 0.2% FS (entire range)	± 0.2% FS (80 to 120 mm)	± 2% FS (200 to 400 mm)	± 0.2% FS (entire range)	± 0.2% FS (32 to 48 mm)	± 0.2% FS (80 to 120 mm)	± 2% FS (200 to 400 mm)	± 0.2% FS (entire range)
Temperature characteristic*4	± 0.03% FS/°C (Except for ZX-LD300 and ZX-LD300L, which are ± 0.1% FS/°C.)
Ambient temperature	Incandescent lamp: 3,000 l× max. (on light receiving side)
Ambient illumination	Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destru ction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection	IEC60529, IP50			IEC60529, IP40	IEC60529, IP50			IEC60529, IP40
Connection method	Connector relay (standard cable length: 500 mm)
Weight (packed state)	Approx. 150 g			Approx. 250 g	Approx. 150 g			Approx. 250 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass			Case and cover: Aluminum, Lens: Glass	Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass			Case and cover: Aluminum, Lens: Glass
Accessories	Instruction sheet, Laser warning label (English)

1. Beam size: The beam size is defined by 1/e² (13.5%) of the strength of the beam at the beam center (measured value). Incorrect detection may occur if there is light leakage outside the defined spot and the material around the sensing object is more reflective than the sensing object.
2. Resolution: The resolution is the deviation (±3σ) in the linear output when connected to the ZX-LDA Amplifier Unit. (The resolution is measured with the standard reference object (white ceramic), at the measurement point with the ZX-LDA set for an average count of 4,096 per period.)
   The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields.
3. Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured.
4. Temperature characteristic: The temperature characteristic is measured at the measurement point with the Sensor and reference object (OMRON's standard reference object) secured with an aluminum jig. Note: Highly reflective objects can result in incorrect detection by causing out-of-range measurements.

Sensor Heads (Through-beam)

Model		ZX-LT001		ZX-LT005	ZX-LT010	ZX-LT030
Optical system		Through-beam
Light source (wave length)		Visible-light semiconductor laser with a wavelength of 650 nm
		EN class 1, FDA class II
Light source (wave length)	Maximum output	0.2 mW max.		0.35 mW max.		0.2 mW max.
Measurement width		1-mm dia.	1- to 2.5-mm dia.	5 mm	10 mm	30 mm
Measurement distance		0 to 500 mm	500 to 2,000 mm	0 to 500 mm
Minimum sensing object		8-μm dia. (opaque)	8- to 50-μm dia. (opaque)	0.05-mm dia. (opaque)	0.1-mm dia. (opaque)	0.3-mm dia. (opaque)
Resolution*1		4 μm*2	---	4 μm*3		12 μm*4
Temperature characteristic		±0.2% FS/°C				±0.3% FS/°C
Ambient illumination		Incandescent lamp: 10,000 l× max. (on light-receiving side)
Ambient temperature		Operating: 0 to 50°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity		Operating: 35% to 85% (with no condensation)
Degree of protection		IEC60529, IP40
Connection method		Connector relay (standard cable length: 500 mm)
Weight (packed state)		Approx. 220 g				Approx. 450 g
Cable length		Extendable up to 10 m with special extension cable.
Materials	Case	Polyether imide				Zinc die-cast
	Cover	Polycarbonate
	Front filter	Glass
Tightening torque		0.3 Nm max.
Accessories		Instruction sheet, Sensor Head-Amplifier Connection Cable
		Optical axis adjustment seal				Mounting Bracket

1. This value is obtained by converting the deviation (±3σ) in the linear output that results when the sensor head is connected to the amplifier unit, into the measurement width.
2. For an average count of 64. The value is 5 μm for an average count of 32. This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
3. For an average count of 64. The value is 5 μm for an average count of 32.
4. For an average count of 64. The value is 15 μm for an average count of 32.

Amplifier Units

Model	ZX-LDA11-N	ZX-LDA41-N
Measurement period *1	150 μs
Possible average count settings	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096
Temperature characteristic	When connected to a Reflective Sensor Head: 0.01% FS/°C, When connected to a Through-beam Sensor Head: 0.1% FS/°C
Linear output *2	Current output: 4 to 20 mA/FS, Max. load resistance: 300 Ω Voltage output: ±4 V (± 5 V, 1 to 5 V *3), Output impedance: 100 Ω
Judgement outputs (3 outputs: HIGH/PASS/LOW) *1	NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max.	PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max.
Laser OFF input, zero reset input, timing input, reset input	ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.)	ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.)
Functions	Measurement value display, present value/set value/light level/resolution display, scaling, display reverse, display OFF mode, ECO mode, number of display digit changes, sample hold, peak hold, bottom hold, peak-to- peak hold, self-peak hold, self-bottom hold, average hold, delay hold, intensity mode, zero reset, initial reset, ON-delay timer, OFF-delay timer, one-shot timer, deviation, previous value comparison, sensitivity adjustment, keep/clamp switch, direct threshold value setting, position teaching, 2-point teaching, automatic teaching, hysteresis width setting, timing inputs, reset input, monitor focus, linear output compensation, (A-B) calculations14, (A+B) calculations*4, mutual interference*4, laser deterioration detection, zero reset memory, zero reset display, key lock
Indications	Operation indicators: High (orange), pass (green), low (yellow), 7-segment main display (red), 7-segment subdisplay (yellow), laser ON (green), zero reset (green), enable (green)
Power supply voltage	12 to 24 VDC ± 10%, Ripple (p-p): 10% max.
Current consumption	140 mA max. with power supply voltage of 24 VDC (with Sensor connected)
Ambient temperature	Operating and storage: 0 to 50°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Connection method	Prewired (standard cable length: 2 m)
Weight (packed state)	Approx. 350 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories	Instruction sheet

1. The response time for the first linear output or judgment output is calculated as follows (with fixed sensitivity): Measurement period × (Average count setting + 1). The response time for the second and later outputs is the measurement period specified in the table.
2. The output can be switched between a current output and voltage output using a switch on the bottom of the Amplifier Unit.
3. Setting is possible via the monitor focus function.
4. A Calculating Unit (ZX-CAL2) is required.

Calculating Unit

Model	ZX-CAL2
Applicable Amplifier Units	ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41
Current consumption	12 mA max. (supplied from the Smart Sensor Amplifier Unit)
Ambient temperature	Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Connection method	Connector
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Insulation resistance	100 MΩ (at 500 VDC)
Vibration resistance (destructive)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destructive)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Materials	Display: Acrylic, Case: ABS resin
Weight (packed state)	Approx. 50 g

ZX-series Communications Interface Unit

Item		ZX-SF11
Current consumption		60 mA max. (supplied by the Amplifier Unit)
Applicable Amplifier Units		ZX Series
Applicable Amplifier Unit versions		ZX-LDA[]1-N Ver. 2.100 or higher ZX-EDA[]1 Ver. 1.100 or higher ZX-TDA[]1 Ver. 1.000 or higher
Max. No. of Amplifier Units		5 (max. 2 with calculating unit)
Commu- nications functions	Communications port	RS-232C port (9-pin D-Sub Connector)
	Communications protocol	CompoWay/F*
	Baud rate	38,400 bps
	Data configuration	Data bits: 8, Parity: none, Start bits: 1, Stop bits: 1, Flow control: none
Indicators		Power supply: green, Sensor communications: green, Sensor communications error: red, External terminal communications: green, External terminal communications error: red
Protective circuits		Reverse polarity protection
Ambient temperature		Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity		Operating and storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Materials		Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories		Instruction sheet, 2 clamps

* Contact your OMRON representative for CompoWay/F communications specifications.

ขนาด | Photoelectric Sensor Displacement Sensor - ZX-L-N series

Sensor Heads (Diffuse Reflective)

ZX-LD40 ZX-LD100 ZX-LD300 ZX-LD40L ZX-LD100L ZX-LD300L

Sensor Heads (Regular Reflective)

ZX-LD30V ZX-LD30VL

Sensor Heads (Through-beam)

ZX-LT001 ZX-LT005

ZX-LT010

ZX-LT030

Sensor Head - Amplifier Unit Connection Cable

Amplifier Units

ZX-LDA11-N ZX-LDA41-N

Accessories (Order Separately)

Calculating Unit

ZX-CAL2

Side-view Attachments

ZX-XF12

ZX-XF22

ZX-series Communications Interface Unit
ZX-SF11

Cables with Connectors on Both Ends (for Extension)
ZX-XC1A (1 m)
ZX-XC4A (4 m)
ZX-XC8A (8 m)
ZX-XC9A (9 m)

คุณสมบัติ | Photoelectric Displacement Sensor - ZX-L-N series

ฟังก์ชันอัจฉริยะภายในตัวกล้องขนาดกะทัดรัด พร้อมด้วยเลเซอร์ประเภทเต็มรูปแบบ

---

ข้อมูลจำเพาะ | Photoelectric Sensor Displacement - ZX-L-N series

Photoelectric Displacement Sensor	ZX-L-N
ระบบออปติก	Diffuse reflective, Regular reflective
จุดวัด	30, 40, 100, 300 mm
รูปร่างลำแสง	แบบจุด, แบบเส้น
ความละเอียด	0.25, 2, 16, 300 ไมโครเมตร
ระดับการป้องกัน	IP40, IP50
วัสดุภายนอก	PBT, อลูมิเนียม