DANA Motor Variable Displacement - SH7VR series

SH7VR series are a family of variable displacement motors, bent axis piston design, for operation in open and closed circuit. SH7VR series motors are plug-in motors for gear boxes, for combinations such as track drives and winch applications. Flangeable valves, for open and closed circuit are available.

DANA Axial piston Motor Variable Displacement - SH7VR series

ดาวน์โหลดไฟล์ PDF

Feature | DANA Motor Variable Displacement SH7VR

SH7VR series are a family of variable displacement motors, bent axis piston design for operation in both open and closed circuit. SH7VR series motors are mainly intended for installation in mechanical gearboxes such as track drive and winches gear boxes. The proven design incorporating the lens shape valve plate, the high quality components and manifacturing tecniques make able the SH7VR series motors to provide up to 430 bar [6235 psi] continuous and 480 bar [6960 psi] peak performance. Fully laboratory tested and field proven, these motors assume maximum efficiency and long life even at very bad filtering conditions. Heavy duty bearings permit high radial and axial loads. Versatile design includes a variety of control and shaft ends that will adapt the SH7VR series motors to any application both industrial and mobile.

---

Specifications | DANA Motor Variable Displacement SH7VR

Series				055	075	108	160
Displacement	-	Vgmax	cm3/rev [in3/rev]	61 [3.72]	80.58 [4.91]	112.5 [6.86]	160.8 [9.81]
	Standard	Vgmin	cm3/rev [in3/rev]	30 [1.83]	40 [2.44]	56 [3.416]	80 [4.88]
	Minima ragglungibile Minimum possible	Vgmin	cm3/rev [in3/rev]	12.2 [0.74]	16 [0.97]	22 [1.34]	32.2 [1.96]
	Opzionale Optional	Vg0	cm3/rev [in3/rev]	0 [0]	0 [0]	0 [0]	0 [0]
Max. pressure	cont.	Pnom	bar [psi]	430 [6235]	430 [6235]	430 [6235]	430 [6235]
	picco peak	Pmax	bar [psi]	480 [4960]	480 [4960]	480 [4960]	480 [4960]
Max. flow		qmax	l/min [U.S. gpm]	271 [71.5]	322 [85]	400 [105.6]	500 [132]
Max speed at Vgmax e qmax		nmax	rpm	4450	4000	3550	3100
Max speed at Vg < Vgmax (2)		nmax lim	rpm	7000	6150	5600	5000
Max speed at Vg0		nmax0 lim	rpm	8350	7350	6300	5500
Torque costant Vgmax		Tk	Nm/bar [Ibf·ft/psi]	0.97 [0.04]	1.28 [0.06]	1.79 [0.09]	2.56 [0.13]
Max. power at qmax e pnom		Pmax	kW [hp]	194 [259.9]	231 [309.5]	273 [365.8]	330 [442.2]
Max. torque at Vgmax	cont. (Pnom)	Tnom	Nm [Ibf·ft]	418 [308]	552 [406.8]	770 [567.5]	1101 [811.4]
	Picco Peak (Pmax)	Tmax	Nm [Ibf·ft]	446 [343.4]	616 [453.9]	859 [633]	1230 [906.5]
Moment of inertia		J	kg·m2 [Ibf·ft2 ]	0.005 [0.12]	0.009 [022]	0.0124 [0.31]	0.026 [0.616]
Weight (3)		m	kg [Ibs]	28 [61.7]	36 [79.3]	47 [103.6]	63 [138.8]
Drainage flow (4)		qd	l/min [U.S. gpm]	3 [0.79]	4 [1.05]	5 [1.32]	5 [1.32]

(Theorial values, without considering n_hm and n_v; approximate values). Peak operations must not excede 1% of every minute. A simultaneous maximum pressure and maximum speed not recommended.

1. Maximum and minimum displacement can be changed with continuity. When ordering state Vg_max and Vg_min required.
2. Determination of displacement. To determine the relationship beetween Vgmax and n_max use the right side chart. Motor maximum admissible speed is n_{max lim.}
3. Approximate values.
4. Maximum value at 250 bar [3625 psi] with mineral oil at 45ºC [113ºC] and 35 cSt of viscosity.